Selective extraction of Ascorbic acid by molecular imprinted polymer solid-phase extraction

Document Type : Research Article

Author

department of chemistry ,islamic azad university, marvdaht ,Iran

Abstract

A Highly sensitive and selective molecular imprinted polymer (MIP) was synthesized for solid phase extraction and preconcentration of trace amount of Ascorbic acid (AA). Parameters affecting separation and synthesis the polymer such as volume of the solvent, equilibration time, material selectivity and capacity, time, pH, … were checked by ultraviolet (UV) spectroscopy. Then the imprinted polymer applied for extraction of AA with solid-phase extraction, the process done with batch method. The selectivity of method was checked using some real samples. Linear range of the method was examined the data obtained showed linearity over the range of 0.4-9.0 mg/L.

Keywords

Main Subjects

References

[1] D. Nowak, Vitamin C in Human Health and Disease, Nutrients, 13 (2021) 1595-1598.
[2] L. ozcan, M. sahin, Electro chemical preparation of a molecularly imprinted polypyrrole-modified pencil graphite electrode for determination of ascorbic acid  ,Sensors, 8 (2008) 5792-5805.
[3] H. Elgailani,  M. A. M. Gad-Elkareem ,E. A. A. Noh , O. E. A. Adam, A. M. A. Alghamdi , Comparison of Two Methods for The Determination of Vitamin C (Ascorbic Acid) in Some Fruits , American Journal of Chemistry ,  2 (2017)1-7.
[4] H. Abera, M. Abdisa & A.P. Washe ,Spectrophotometric method to the determination of ascorbic acid in M. stenopetala leaves through catalytic titration with hexavalent chromium and its validation ,International Journal of food properties, 23 (            q 2020) 999–1015.
[5] H. Noruzi Moghadam, A. Banaei, A. Bozorgian, Biological Adsorption For Removal of Hydrogen sulfide from Aqueous Solution by Live Eisenia foetida Worms, Advanced Journal of Chemistry, Section B: Natural Products and Medical Chemistry, 4 (2022) 144-157.
[6] A. Samimi, S. Zarinabadi, A. Bozorgian, Optimization of Corrosion Information in Oil and Gas Wells Using Electrochemical Experiments, International Journal of New Chemistry, 8 (2021) 149-163.
[7] K. A. M. Said , Z. Radzi, I. Yakub, M. A. Mohamed Amin, Extraction and quantitative  determination of ascorbic acid frombanana peel  mussaacuminata  kapok, IIUM Engineering Journal, 17 (2016) 103–114.
[8] J. Mashhadizadeh, A. Bozorgian, A. Azimi, Investigation of the kinetics of formation of Clatrit-like dual hydrates TBAC in the presence of CTAB, Eurasian Chemical Communication, 2 (2020) 536-547.
[9] A. Bozorgian, B. Raei, Thermodynamic modeling and phase prediction for binary system dinitrogen monoxide and propane, Journal of Chemistry Letters 1 (2020) 143-148.
[10] K. Haupt, Peer reviewed: molecularly imprinted polymers: the next generation, Anal. Chem. 75 (2003) 376-383
[11]  H. Nayra,  A. Hebatallah  ,M. Abdel-Halim , M. El Nashar  ,Validation and Application of Molecularly Imprinted Polymers for SPE/UPLC–MS/MS Detection of Gemifloxacin Mesylate, Chromatographia  , 82 (2019) 1617–1631
[12] J. Lurie, Handbook of Analytical Chemistry, (English translation), Mir, Moscow, 1975.
[13] M. M Rahman Khan and M. Mazedul Hosain, Analysis of vitamin C (ascorbic acid) contents in various fruits and vegetables by UV-spectrophotometry, Bangladesh J. Sci. Ind. Res. , 42 (2007) 417-424.
[14] K. Karim, F. Breton, R. Rouillon, How to find effective functional monomers for effective molecularly imprinted polymers? , Advanced Drug Delivery Reviews, 57 (2005) 1795– 1808
[15] H. D. Revanasiddappa and  M. A. veena , Sensitive Spectrophotometric Methods for the Determination of Ascorbic Acid , E-Journal of Chemistry 5(2008) 10-15.
[16] G. Pan , B. Zu, X. Guo, , Y. Zhang, C.Li, , H. Zhang, Preparation of molecularly imprinted polymer microspheres via reversible addition–fragmentation chain transfer precipitation polymerization , Polymer,  50(2009) 2819–2825.

Files

Share

How to cite

Statistics